=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2026.04.16 19:45:36 =~=~=~=~=~=~=~=~=~=~=~=
UART_115200


AC_ON
01-2L-SM-02-20190920

MIU0_DQS-OK

BIST0-OK

NOTICE:  BL3-1: v1.1(debug):65b218c8
NOTICE:  BL3-1: Built : 15:04:58, Sep  1 2025
INFO:    warmboot return address : 7d2c1c00
INFO:    BL3-1: Initializing runtime services
NOTICE:  From args : boot_mbx = 20028064 
INFO:    [0;32;31m [Booting] mstar_send_magic_ATF 479 [m
INFO:    BL3-1: Initializing BL3-2
[Ramlog] ramlog_init init success

INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x20100000
INFO:    BL3-1: Next image spsr = 0x1d3
INFO:    BIN1_32bit mode Sep  1 2025 15:04:58
INFO:    R1 0
INFO:    R2 0
INFO:    R3 0
ree_entry
U
Relocation Offset is: 01900000
[AT][MB][start ub][647]

U-Boot 2011.06-00000-g31736d7-dirty (Sep 30 2025 - 00:24:17) 

[Mboot] ===== sw IR Config Register ===== 
[Mboot] ===== Attach IR Interrupt  ======
[Utopia][SYS]: [35mFunction = SYSOpen, Line = 3599, current resource pri_shm content is: 0[m
[Utopia][SYS]: [35mFunction = SYSOpen, Line = 3618, [SYS INFO] OPEN INSTANCE...[m
[Utopia][MIU]: [MIU INFO] miu openNo MMC device available
Uboot Relocation:  152 MiB

eMMC HS400 200MHz
eMMC 3.68 GB 
eMMC Warn used life: exceeded max
 CID
  0x00A905D9
  0xD5150231
  0x41473430
  0x30000111

uboot held at [284DDF60~29800000],size=013220A0
Now running in RAM - U-Boot at: 28D00000
DRAM : 1536MB
SAR5=ON
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
MAC:  0x88: 0xB8: 0x63: 0xA0:0xB6: 0x7C
bootflag = 0x1, sboot_verify_mboot_flag = 0x0000, sboot_verify_optee_flag=0x0000
[AT][MBoot][Driver Init][739]
ProjectID: 175
mmc change mount : tvconfig
Size of file "/config/ds_config.ini" from mmc device 0 partition tvconfig: 2799 bytes
Loading file "/config/ds_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
2799 bytes read
[fs_loadfile] loadaddr: 0x28706800   filesize: 2799
ds_config.ini panel_power_off_delay:1000
set delay:1000
first power on after OTA upgrade
[do_his_deploy] flag: 0x00AA
mmc change mount : serialdata
Size of file "/common/models.ini" from mmc device 0 partition serialdata: 529 bytes
Loading file "/common/models.ini" at offset 0x0 from mmc device 0 partition serialdata
529 bytes read
mmc change mount : optfs
Size of file "/config/basic.ini" from mmc device 0 partition optfs: 1797 bytes
Loading file "/config/basic.ini" at offset 0x0 from mmc device 0 partition optfs
1797 bytes read
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
serial name:MTK_DEV_EU_AP_EARC_4K,sw version:A.P0930
[deploy_step_01] start 964 ms: 
mmc change mount : serialdata
Size of file "/common/models.ini" from mmc device 0 partition serialdata: 529 bytes
Loading file "/common/models.ini" at offset 0x0 from mmc device 0 partition serialdata
529 bytes read
mmc change mount : optfs
[fs_loadfile] loadaddr: 0x28706828   filesize: 529
ProjectID: 175 Name: 43A56FEVS_0010
[upgrade_tvconfig] start 1022 ms: upgrade tvconfig
mmc change mount : serialdata
Size of file "/tvconfigImages/tvconfig_43A56FEVS_0010.ext4.lzo" from mmc device 0 partition serialdata: 1917509 bytes
Loading file "/tvconfigImages/tvconfig_43A56FEVS_0010.ext4.lzo" at offset 0x0 from mmc device 0 partition serialdata
1917509 bytes read
mmc change mount : optfs
[fs_loadfile] loadaddr: 0x32000000   filesize: 1917509
MMC erase: dev # 0, user area part, block # 1144065, count 40960 (unit: sector)... 
40960 blocks erase: OK
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
mmc change mount : tvconfig
Failed to mount ext2 filesystem...
** Bad ext4 partition or disk - mmc 0:26 **
[0;31m[ERROR] vfs_getsize:420: [0mext4filesize mmc fail, try again! 
Failed to mount ext2 filesystem...
** Bad ext4 partition or disk - mmc 0:26 **
[0;31m[ERROR] vfs_getsize:424: [0mext4filesize mmc fail
[0;31m[ERROR] LoadMMAP:873: [0mget the file size of /config/MMAP_MI.h fail
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
   Uncompressing ... 
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
    Continue uncompressing and writing emmc...
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
    Depressed OK! Write to tvconfig partition OK!
Total write size: 0x1400000
[upgrade_tvconfig] use 875 ms: upgrade tvconfig
<DIR>       4096 .
<DIR>       4096 ..
<DIR>       4096 lost+found
<DIR>       4096 3d
           47703 Board.h
<DIR>       4096 ColorMatrix
<DIR>       4096 DLC
              37 Did
<DIR>       4096 EDID_BIN
<DIR>       4096 HDR
<DIR>       4096 HDR_BIN
<DIR>       4096 MM
           46881 MMAP_MI.h
<DIR>       4096 OSD
<DIR>       4096 PQ_general
<DIR>       4096 PlayReady
            9848 Qos.bin
            9848 QosCustomer.bin
            1065 ScenarioTable.dat
<DIR>       4096 VD
<DIR>       4096 adb
<DIR>       4096 appipc
<DIR>       4096 apps_file
<DIR>       4096 aq
<DIR>       4096 atv
           75365 board.ini
             232 boot.ini
           59952 boot0.mp3
           20755 bootlogo.jpg
          203034 cacert.pem
<SYM>          1 config
<DIR>       4096 customer
            1676 daemon_profile
<DIR>       4096 dap
            1464 dfbrc.ini
            2526 directfbrc
<DIR>       4096 dispout
<DIR>       4096 drm
            2799 ds_config.ini
<DIR>       4096 dts_vx
            2377 extlibs_profile
<DIR>       4096 font
            1539 gamepad_keymap
<DIR>       4096 gamma
             306 hashkey.sign
<DIR>       4096 hdcp
          250893 ir_config.ini
<DIR>       4096 ldm
<DIR>       4096 model
<DIR>       4096 module
           35496 mstarkeymap.csv
            2018 mtk2hisensekeycode
           44002 mufirkeymap
             930 mufkeypadkeymap
             938 network
<DIR>       4096 optee
<DIR>       4096 panel
<DIR>       4096 pcmode
<DIR>       4096 playready
<DIR>       4096 pm
<DIR>       4096 pq
            2285 profile
            1307 ps_keymap
              55 readme.txt
             126 resolv.conf
            2253 set_env
            1629 switch_keymap
            1555 sys.ini
<DIR>       4096 tcon
<DIR>       4096 usb
<DIR>       4096 version
<DIR>       4096 voc
<DIR>       4096 widevine
[upgrade_modeldata] start 2129 ms: upgrade modeldata
mmc change mount : serialdata
Size of file "/hidatamodelImages/modeldata_43A56FEVS_0010.ext4.lzo" from mmc device 0 partition serialdata: 735804 bytes
Loading file "/hidatamodelImages/modeldata_43A56FEVS_0010.ext4.lzo" at offset 0x0 from mmc device 0 partition serialdata
735804 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x32000000   filesize: 735804
MMC erase: dev # 0, user area part, block # 1609987, count 61440 (unit: sector)... 
61440 blocks erase: OK
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
   Uncompressing ... 
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
    Continue uncompressing and writing emmc...
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_LZO_MEM_USAGE_ADR fail
[0;31m[ERROR] LoadMMAP:844: [0mLoadMMAP fail last time, skip it!
[0;31m[ERROR] init_mmap:548: [0mload mmap fail
[0;31m[ERROR] get_mmap:516: [0minit mmap fail
    Depressed OK! Write to modeldata partition OK!
Total write size: 0x1E00000
[upgrade_modeldata] use 1683 ms: upgrade modeldata
<DIR>       4096 .
<DIR>       4096 ..
<DIR>       4096 lost+found
              23 Readme
<DIR>       4096 config
<DIR>       4096 dataModule
<DIR>       4096 version
set deploy flag to datainfo
1 blocks written: OK
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
[deploy_step_01] use 2895 ms: 
[deploy_step_03] start 3862 ms: 
mmc change mount : tvconfig
Size of file "/config/ds_config.ini" from mmc device 0 partition tvconfig: 2799 bytes
Loading file "/config/ds_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
2799 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x28706828   filesize: 2799
mmc change mount : modeldata
Size of file "/config/board.ini" from mmc device 0 partition modeldata: 3722 bytes
Loading file "/config/board.ini" at offset 0x0 from mmc device 0 partition modeldata
3722 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x28707320   filesize: 3722
1 blocks written: OK
[deploy_step_03] use 160 ms: 
[deploy_step_05] start 4024 ms: 
[upgrade_RTPM:216] do nothing when !(CONFIG_ENABLE_RTPM && CONFIG_MSTAR_RT_PM_IN_EMMC)
[deploy_step_05] use 11 ms: 
[deploy_step_07] start 4037 ms: 
get /config/tcon/innertcon.ini from tvconfig
mmc change mount : tvconfig
Size of file "/config/tcon/innertcon.ini" from mmc device 0 partition tvconfig: 1792 bytes
Loading file "/config/tcon/innertcon.ini" at offset 0x0 from mmc device 0 partition tvconfig
1792 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x28706858   filesize: 1792
1 blocks written: OK
1 blocks written: OK
1 blocks written: OK
1 blocks written: OK
get /config/ds_config.ini from tvconfig
mmc change mount : tvconfig
Size of file "/config/ds_config.ini" from mmc device 0 partition tvconfig: 2799 bytes
Loading file "/config/ds_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
2799 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x28706870   filesize: 2799
1 blocks written: OK
get LED data after sync.
[deploy_step_07] use 265 ms: 
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
[VCOM] set gpio 177, high
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
mmc change mount : tvconfig
Size of file "/config/sys.ini" from mmc device 0 partition tvconfig: 1555 bytes
Loading file "/config/sys.ini" at offset 0x0 from mmc device 0 partition tvconfig
1555 bytes read
sizeof( sys ini script ) --------> 1555 bytes
set platform=mi to bootargs OK
Can't get audio_amp_config.ini from /config/sys.ini
customer_ini_path env value --> /config/model/Customer_1.ini
Half model.ini path --> /config/model/Customer_1.ini
Size of file "/config/model/Customer_1.ini" from mmc device 0 partition tvconfig: 23964 bytes
Loading file "/config/model/Customer_1.ini" at offset 0x0 from mmc device 0 partition tvconfig
23964 bytes read
Full model.ini  path --> /config/model/Customer_1.ini
Size of file "/config/model/Customer_1.ini" from mmc device 0 partition tvconfig: 23964 bytes
Loading file "/config/model/Customer_1.ini" at offset 0x0 from mmc device 0 partition tvconfig
23964 bytes read
mmc change mount : tvconfig
Size of file "/config/model/Customer_1.ini" from mmc device 0 partition tvconfig: 23964 bytes
Loading file "/config/model/Customer_1.ini" at offset 0x0 from mmc device 0 partition tvconfig
23964 bytes read
sizeof( model ini script ) --------> 23964 bytes
Half panel.ini path --> /config/panel/UD_VB1_8LANE_CSOT_URSA.ini
Size of file "/config/panel/UD_VB1_8LANE_CSOT_URSA.ini" from mmc device 0 partition tvconfig: 37786 bytes
Loading file "/config/panel/UD_VB1_8LANE_CSOT_URSA.ini" at offset 0x0 from mmc device 0 partition tvconfig
37786 bytes read
Full panel.ini  path --> /config/panel/UD_VB1_8LANE_CSOT_URSA.ini
Half board.ini path --> /config/board.ini
Full board.ini  path --> /config/board.ini
Can't get audio_amp_config.ini from /config/model/Customer_1.ini
Half GAMMA_BIN path --> /config/gamma/panel_gamma.bin
Size of file "/config/gamma/panel_gamma.bin" from mmc device 0 partition tvconfig: 8256 bytes
Half gamma.bin path --> /config/gamma/panel_gamma.bin
Full gamma.bin  path --> /config/gamma/panel_gamma.bin
Half keypad path --> /tvconfig/config/board.ini
Full keypad  path --> /tvconfig/config/board.ini
Half TCON_BIN path --> /config/tcon/TCON20.bin
Size of file "/config/tcon/TCON20.bin" from mmc device 0 partition tvconfig: 16985 bytes
TCON path --> /config/tcon/TCON20.bin
swing_level -> [400]
MIRROR_OSD is  --> False
MIRROR_VIDEO -> [400]
MIRROR_VIDEO is  [True] or [False], other value can not be parsed
mmc change mount : tvconfig
Size of file "/config/module/Customer_Module.ini" from mmc device 0 partition tvconfig: 3914 bytes
Loading file "/config/module/Customer_Module.ini" at offset 0x0 from mmc device 0 partition tvconfig
3914 bytes read
sizeof( module ini script ) --------> 3914 bytes
mmc change mount : tvconfig
** File not found /config/customer/boot.ini
[0;31m[ERROR] vfs_getsize:420: [0mext4filesize mmc fail, try again! 
** File not found /config/customer/boot.ini
[0;31m[ERROR] vfs_getsize:424: [0mext4filesize mmc fail
Size of file "/boot.ini" from mmc device 0 partition tvconfig: 232 bytes
Loading file "/boot.ini" at offset 0x0 from mmc device 0 partition tvconfig
232 bytes read
sizeof( boot ini script ) --------> 232 bytes
gMusicPath --> /boot0.mp3
gLogoPath --> 
m_u32MusicVol -> [0x14]
** File not found /apollo/boot_cfg.ini
[0;31m[ERROR] vfs_getsize:420: [0mext4filesize mmc fail, try again! 
** File not found /apollo/boot_cfg.ini
[0;31m[ERROR] vfs_getsize:424: [0mext4filesize mmc fail
No enough buffer or path fail(/apollo/boot_cfg.ini) :
[src/MsUtility.c] [loadscript]
[0;31m[ERROR] parse_boot_cfg_ini:2216: [0mload /apollo/boot_cfg.ini failed
** File not found /apollo/boot_mode.ini
[0;31m[ERROR] vfs_getsize:420: [0mext4filesize mmc fail, try again! 
** File not found /apollo/boot_mode.ini
[0;31m[ERROR] vfs_getsize:424: [0mext4filesize mmc fail
No enough buffer or path fail(/apollo/boot_mode.ini) :
[src/MsUtility.c] [loadscript]
[0;31m[ERROR] parse_boot_cfg_ini:2216: [0mload /apollo/boot_mode.ini failed
set env boot_ctrl to [0x0]
mmc change mount : tvconfig
mmc change mount : criticaldata
Size of file "/config/critical.ini" from mmc device 0 partition criticaldata: 1555 bytes
Loading file "/config/critical.ini" at offset 0x0 from mmc device 0 partition criticaldata
1555 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x28719870   filesize: 1555
mmc change mount : serialdata
Size of file "/common/logos/boot1.jpg" from mmc device 0 partition serialdata: 87305 bytes
mmc change mount : tvconfig
logo: /common/logos/boot1.jpg, size: 87305
Size of file "/config/tcon/TCON20.bin" from mmc device 0 partition tvconfig: 16985 bytes
Size of file "/config/gamma/panel_gamma.bin" from mmc device 0 partition tvconfig: 8256 bytes
gRGBWPath=/config/gamma/panel_gamma.bin
gstDbtable.dbdata[E_DB_RGBW].Size=0x2040
** File not found 284DD16C
[0;31m[ERROR] vfs_getsize:420: [0mext4filesize mmc fail, try again! 
** File not found 284DD16C
[0;31m[ERROR] vfs_getsize:424: [0mext4filesize mmc fail
g3DLUTBinPath=
gstDbtable.dbdata[E_DB_3DLUT].Size=0x0
MPOOL size : 0x600000
mmc change mount : serialdata
Size of file "/common/logos/boot1.jpg" from mmc device 0 partition serialdata: 87305 bytes
Loading file "/common/logos/boot1.jpg" at offset 0x0 from mmc device 0 partition serialdata
87305 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x287398A8   filesize: 87305
mmc change mount : tvconfig
Size of file "/config/panel/UD_VB1_8LANE_CSOT_URSA.ini" from mmc device 0 partition tvconfig: 37786 bytes
Loading file "/config/panel/UD_VB1_8LANE_CSOT_URSA.ini" at offset 0x0 from mmc device 0 partition tvconfig
37786 bytes read
sizeof( panel ini script ) --------> 37786 bytes
u32PeriodPWM = 16666 
u32DutyPWM = 0x23CE
mmc change mount : tvconfig
Size of file "/config/board.ini" from mmc device 0 partition tvconfig: 75365 bytes
Loading file "/config/board.ini" at offset 0x0 from mmc device 0 partition tvconfig
75365 bytes read
sizeof( board ini script ) --------> 75365 bytes
mmc change mount : tvconfig
Size of file "/config/dfbrc.ini" from mmc device 0 partition tvconfig: 1464 bytes
Loading file "/config/dfbrc.ini" at offset 0x0 from mmc device 0 partition tvconfig
1464 bytes read
sizeof( dfb ini script ) --------> 1464 bytes
logo -> [1]
mmc change mount : tvconfig
Size of file "/config/tcon/TCON20.bin" from mmc device 0 partition tvconfig: 16985 bytes
Loading file "/config/tcon/TCON20.bin" at offset 0x0 from mmc device 0 partition tvconfig
16985 bytes read
mmc change mount : tvconfig
Size of file "/config/ir_config.ini" from mmc device 0 partition tvconfig: 250893 bytes
Loading file "/config/ir_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
250893 bytes read
sizeof( ir_config ini script ) --------> 250893 bytes
section = MIR_Hisense 
Size of file "/config/ir_config.ini" from mmc device 0 partition tvconfig: 250893 bytes
Loading file "/config/ir_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
250893 bytes read
sizeof( ir_config ini script ) --------> 250893 bytes
mmc change mount : tvconfig
Size of file "/config/gamma/panel_gamma.bin" from mmc device 0 partition tvconfig: 8256 bytes
Loading file "/config/gamma/panel_gamma.bin" at offset 0x0 from mmc device 0 partition tvconfig
8256 bytes read
mmc change mount : tvconfig
Size of file "/config/board.ini" from mmc device 0 partition tvconfig: 75365 bytes
Loading file "/config/board.ini" at offset 0x0 from mmc device 0 partition tvconfig
75365 bytes read
sizeof( /config/board.ini script ) --------> 75365 bytes


[Load_KeypadToFlash:5696] get keypad info from /config/board.ini
mmc change mount : tvconfig
** File not found 284DD174
[0;31m[ERROR] vfs_getsize:420: [0mext4filesize mmc fail, try again! 
** File not found 284DD174
[0;31m[ERROR] vfs_getsize:424: [0mext4filesize mmc fail
[0;31m[ERROR] Load_3DLUTBinToFlash:5753: [0mvfs_getsize error:  !
mmc change mount : tvconfig
filter /cusdata or /config, and find file again!!
Size of file "/config/board.ini" from mmc device 0 partition tvconfig: 75365 bytes
Loading file "/config/board.ini" at offset 0x0 from mmc device 0 partition tvconfig
75365 bytes read
sizeof( keypad ini script ) --------> 75365 bytes
[_print_dbtable_info_always] print db_table info
    DB index                  offset         size          end           crc
E_DB_LOGO                  [0x0000013C]  [0x00015509]  [0x00015645]  [0xB65997B4]
E_DB_MUSIC                 [0x00015645]  [0x00000000]  [0x00015645]  [0x00000000]
E_DB_BOARD_PARA            [0x00015645]  [0x000000D4]  [0x00015719]  [0xCD45636F]
E_DB_PANEL_PARA            [0x00015719]  [0x00000072]  [0x0001578B]  [0x4B03BC27]
E_DB_URSA_6M30             [0x0001578B]  [0x00000000]  [0x0001578B]  [0x00000000]
E_DB_URSA                  [0x0001578B]  [0x00000000]  [0x0001578B]  [0x00000000]
E_DB_TCON                  [0x0001578B]  [0x00004259]  [0x000199E4]  [0x3184F24E]
E_DB_PNL_VB1               [0x000199E4]  [0x00000038]  [0x00019A1C]  [0xD3C8A549]
E_DB_PNL_GOPMUX            [0x00019A1C]  [0x0000000E]  [0x00019A2A]  [0x00C44F7E]
E_DB_PWM                   [0x00019A2A]  [0x00000014]  [0x00019A3E]  [0xB410B443]
E_DB_MISC                  [0x00019A3E]  [0x000001D4]  [0x00019C12]  [0x025553C1]
E_DB_MSPI                  [0x00019C12]  [0x00000000]  [0x00019C12]  [0x00000000]
E_DB_DMA                   [0x00019C12]  [0x00000000]  [0x00019C12]  [0x00000000]
E_DB_HDMITX                [0x00019C12]  [0x00000007]  [0x00019C19]  [0xEA6BEFE8]
E_DB_IR_BOOTCHECK          [0x00019C19]  [0x000000C8]  [0x00019CE1]  [0xC971A876]
E_DB_IR_WAKEUP             [0x00019CE1]  [0x0000003C]  [0x00019D1D]  [0x04128908]
E_DB_RGBW                  [0x00019D1D]  [0x00002040]  [0x0001BD5D]  [0x662A991F]
E_DB_KEYPAD                [0x0001BD5D]  [0x00000054]  [0x0001BDB1]  [0x89309977]
E_DB_3DLUT                 [0x0001BDB1]  [0x00000000]  [0x0001BDB1]  [0x00000000]
E_DB_KEYPAD_WAKEUP         [0x0001BDB1]  [0x00000005]  [0x0001BDB6]  [0x8D5C2895]
E_DB_IR_INI_INFO           [0x0001BDB6]  [0x00000163]  [0x0001BF19]  [0xB15E57E0]
E_DB_IW7027DATA            [0x0001BF19]  [0x00000058]  [0x0001BF71]  [0xFB42584D]
E_DB_HIS_RESERVED4         [0x0001BF71]  [0x00000000]  [0x0001BF71]  [0x00000000]
E_DB_HIS_RESERVED3         [0x0001BF71]  [0x00000000]  [0x0001BF71]  [0x00000000]
E_DB_HIS_RESERVED2         [0x0001BF71]  [0x00000000]  [0x0001BF71]  [0x00000000]
E_DB_HIS_RESERVED1         [0x0001BF71]  [0x00000000]  [0x0001BF71]  [0x00000000]
gstDbtable                 [0x00000000]  [0x0000013C]  [0x00000000]  [0x125CDA0C]
224 blocks written: OK
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
mmc change mount : tvconfig
Size of file "/config/MMAP_MI.h" from mmc device 0 partition tvconfig: 46881 bytes
Loading file "/config/MMAP_MI.h" at offset 0x0 from mmc device 0 partition tvconfig
46881 bytes read
no miu_setting information in mmap.ini
no miu_setting information in mmap.ini
No E_LX_MEM3_ADR information 
No E_LX_MEM4_ADR information 
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget GMAC_MEM_ADR fail
[0;31m[ERROR] get_map_ID:517: [0mMap ID maping to [40] a null pointer !!
[0;31m[ERROR] _get_new_map_format_from_env:550: [0mOne of the parameters is a null pointer
[0;31m[ERROR] _get_new_map_format_from_env:556: [0mget MI_AN_RECOVERY_BUF_ADR fail
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
First get need to check from config.ini.
mmc change mount : modeldata
Size of file "/config/config.ini" from mmc device 0 partition modeldata: 7159 bytes
Loading file "/config/config.ini" at offset 0x0 from mmc device 0 partition modeldata
7159 bytes read
mmc change mount : tvconfig
[fs_loadfile] loadaddr: 0x28716160   filesize: 7159
config.ini OemBoard:0
0:MCP_N_D3_2133_8G_4x

1:MCP_N_D3_2133_4G_4x

DRAM Channel 0 Size = [2048MB]

Changelist:	24543697
============= set bootargs ===============
Hit any key to stop autoboot:  0 
get OTA FLAG 0x55
enable dont overwrite function
[ENV] FactoryOpenState: Off
[Mboot_IR] boot from dynamic ir 
fore uup u8KeyPad_KeyVal [0xFF]
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
[BootCheck] --------Nomal Boot--------.
[BootCheck] BootMode: 1
AC on
[ENV] his_hw_reset: false
AC on
[ENV] factory_poweron_mode: secondary
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
[ENV] his_quiet_boot: disable
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
[ENV] his_quiet_boot_status: INVALID
[CheckPowermode] power user mode = secondary
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
[ENV] his_quiet_boot: disable
[HisGPIODeinit] 8657
[HisDoEnterStandby] turn WiFi Power Down
[ENV] UserPowerOffLedState: On
==OTA need Standby==
Check USB port[0]:
[USB] config miu select [F0] [EF] [EF] ][EF]
[USB] enable miu lower bound address subtraction
Error, couldn't init Lowlevel part
Check USB port[1]:
[USB] config miu select [F0] [EF] [EF] ][EF]
[USB] enable miu lower bound address subtraction
Error, couldn't init Lowlevel part
[0;31m[ERROR] findUsbDevice:414: [0mNot find usb device
[0;31m[ERROR] do_setMtkBT:433: [0mfind bt usb device failed
mmc change mount : tvconfig
Loading file "/config/PM.bin" at offset 0x0 from mmc device 0 partition tvconfig
** File not found /config/PM.bin **
[0;31m[ERROR] vfs_read:477: [0mext4load mmc fail, try again!
Loading file "/config/PM.bin" at offset 0x0 from mmc device 0 partition tvconfig
** File not found /config/PM.bin **
[0;31m[ERROR] vfs_read:481: [0mext4load mmc fail
[0;31m[ERROR] SetPm2Sram:410: [0mRetry copy from /config/pm
Loading file "/config/pm/PM.bin" at offset 0x0 from mmc device 0 partition tvconfig
40959 bytes read
Wait for PM51 standby...........PM51 run ok...........-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
[MDrv_PM_Init_Key][909] Retry send MBX CMD(0x1) to PM51.
[MDrv_PM_Init_Key][909] Retry send MBX CMD(0xB2) to PM51.
Set Power Off Short
CRC Check OPEN: 1



Build at Apr 09 2025 - 17:15:30



WOW_GPIO_NUM        = 0

WOW_GPIO_NUM is invalid

WOBT_GPIO_NUM       = 13

WOBT_PM_GPIO_NUM    = 7

WOEWBS_GPIO_NUM     = 255

WOEWBS_PM_GPIO_NUM  = 255

BTW = FF

USB = FF

VAD = FF

PownDown = 0x3F

0x8709

Power Down

 